FM-753 CRACK A4

Stainless Steel Heavy Duty Wedge Anchor with Seismic Certification

Stainless steel wedge anchor for the medium load range in sizes M8 - M16 for anchoring in cracked and non-cracked concrete C20/25 - C50/60, as well as for seismic actions of the performance category C1/C2.

Technical Data Sheet

CE Marking

ETA

Stainless steel A4

Fire resistance R 120

Seismic C1 C2

Fix Calc

Product Details

Images

Features

Material

Stainless steel A4

Benefits

Dynamic and seismic loads
Seismic performance C1 and C2
Immediate expansion
Increased thickness of three expander segments
Nine gripping dents for greater adhesion to hole wall
Fire resistance R120

Application

Applications

Structural fixings
Steel constructions
Seismic applications

Suitable for

Cracked concrete
Non-cracked concrete
Solid stone

Technical Data

Dimensions

Autres

fm-753-crack-rev19.pdf (754.07 KB)

Product dimensions

References	Product Reference	Dimensions [mm]	Thread length	Fixture thickness [t_fix,max] with standard setting depth [h_ef,STD] [mm]	Fixture thickness [t_fix,max] with reduced setting depth [h_ef,RED] [mm]	Hole diameter in fixture [d_f] [mm]	Hole diameter [d_o] x depth [h₁] in substrate with standard setting depth [h_ef,STD] [mm]	Hole diameter [d_o] x depth [h₁] in substrate with reduced setting depth [h_ef,RED] [mm]	Min. setting depth [h_ef,STD] [mm]	Reduced setting depth [h_ef,RED] [mm]	Qty per box	Qty per outer box
7535000806800	FM-753 CRACK A4	M8x68	30	4	18	9	8x70	8x56	48	34	100	400
7535000807500	FM-753 CRACK A4	M8x75	30	10	24	9	8x70	8x56	48	34	100	400
7535000809000	FM-753 CRACK A4	M8x90	40	25	39	9	8x70	8x56	48	34	100	400
7535000811500	FM-753 CRACK A4	M8x115	60	50	64	9	8x70	8x56	48	34	100	400
7535000813500	FM-753 CRACK A4	M8x135	80	70	84	9	8x70	8x56	48	34	100	400
7535000816500	FM-753 CRACK A4	M8x165	80	100	114	9	8x70	8x56	48	34	50	200
7535001009000	FM-753 CRACK A4	M10x90	40	10	30	12	10x80	10x60	60	40	50	200
7535001010500	FM-753 CRACK A4	M10x105	55	25	45	12	10x80	10x60	60	40	50	200
7535001011500	FM-753 CRACK A4	M10x115	55	35	55	12	10x80	10x60	60	40	50	200
7535001013500	FM-753 CRACK A4	M10x135	85	55	75	12	10x80	10x60	60	40	50	200
7535001015500	FM-753 CRACK A4	M10x155	85	75	95	12	10x80	10x60	60	40	50	200
7535001018500	FM-753 CRACK A4	M10x185	85	105	125	12	10x80	10x60	60	40	25	100
7535001211000	FM-753 CRACK A4	M12x110	65	10	30	14	12x100	12x80	72	52	50	200
7535001212000	FM-753 CRACK A4	M12x120	65	20	40	14	12x100	12x80	72	52	50	200
7535001214500	FM-753 CRACK A4	M12x145	85	45	65	14	12x100	12x80	72	52	25	100
7535001217000	FM-753 CRACK A4	M12x170	85	70	90	14	12x100	12x80	72	52	25	100
7535001220000	FM-753 CRACK A4	M12x200	85	100	120	14	12x100	12x80	72	52	25	100
7535001613000	FM-753 CRACK A4	M16x130	65	10	30	18	16x115	16x95	86	66	20	80
7535001615000	FM-753 CRACK A4	M16x150	85	30	50	18	16x115	16x95	86	66	20	80
7535001618500	FM-753 CRACK A4	M16x185	85	60	80	18	16x115	16x95	86	66	20	80
7535001622000	FM-753 CRACK A4	M16x220	85	100	120	18	16x115	16x95	86	66	15	60

Recommended loads / Non-cracked concrete / for single anchors / with no edge distances or spacings

References	Product Reference	Dimensions [mm]	Recommended loads - Non-cracked concrete
			Tension - N_rec				Shear - V_rec				Bending moment M_rec [Nm]
			C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	Bending moment M_rec [Nm]
7535000806800	FM-753 CRACK A4	M8x68	4.8	5.9	6.8	7.4	7.8	7.8	7.8	7.8	10.5
7535000807500	FM-753 CRACK A4	M8x75	4.8	5.9	6.8	7.4	7.8	7.8	7.8	7.8	10.5
7535000809000	FM-753 CRACK A4	M8x90	4.8	5.9	6.8	7.4	7.8	7.8	7.8	7.8	10.5
7535000811500	FM-753 CRACK A4	M8x115	4.8	5.9	6.8	7.4	7.8	7.8	7.8	7.8	10.5
7535000813500	FM-753 CRACK A4	M8x135	4.8	5.9	6.8	7.4	7.8	7.8	7.8	7.8	10.5
7535000816500	FM-753 CRACK A4	M8x165	4.8	5.9	6.8	7.4	7.8	7.8	7.8	7.8	10.5
7535001009000	FM-753 CRACK A4	M10x90	7.6	9.3	10.7	11.8	13.4	13.4	13.4	13.4	21.5
7535001010500	FM-753 CRACK A4	M10x105	7.6	9.3	10.7	11.8	13.4	13.4	13.4	13.4	21.5
7535001011500	FM-753 CRACK A4	M10x115	7.6	9.3	10.7	11.8	13.4	13.4	13.4	13.4	21.5
7535001013500	FM-753 CRACK A4	M10x135	7.6	9.3	10.7	11.8	13.4	13.4	13.4	13.4	21.5
7535001015500	FM-753 CRACK A4	M10x155	7.6	9.3	10.7	11.8	13.4	13.4	13.4	13.4	21.5
7535001018500	FM-753 CRACK A4	M10x185	7.6	9.3	10.7	11.8	13.4	13.4	13.4	13.4	21.5
7535001211000	FM-753 CRACK A4	M12x110	10.5	12.8	14.8	16.3	17.3	17.3	17.3	17.3	37.4
7535001212000	FM-753 CRACK A4	M12x120	10.5	12.8	14.8	16.3	17.3	17.3	17.3	17.3	37.4
7535001214500	FM-753 CRACK A4	M12x145	10.5	12.8	14.8	16.3	17.3	17.3	17.3	17.3	37.4
7535001217000	FM-753 CRACK A4	M12x170	10.5	12.8	14.8	16.3	17.3	17.3	17.3	17.3	37.4
7535001220000	FM-753 CRACK A4	M12x200	10.5	12.8	14.8	16.3	17.3	17.3	17.3	17.3	37.4
7535001613000	FM-753 CRACK A4	M16x130	18.7	22.8	26.4	29	34.9	34.9	34.9	34.9	94.9
7535001615000	FM-753 CRACK A4	M16x150	18.7	22.8	26.4	29	34.9	34.9	34.9	34.9	94.9
7535001618500	FM-753 CRACK A4	M16x185	18.7	22.8	26.4	29	34.9	34.9	34.9	34.9	94.9
7535001622000	FM-753 CRACK A4	M16x220	18.7	22.8	26.4	29	34.9	34.9	34.9	34.9	94.9

1) In case of interaction of tension and shear loads (lever arm) as well as in case of anchor groups and/or edge influence, a design according to EN 1992-4 (seismic actions - Annex C / fire action
- Annex D) shall be carried out taking into account the entire European Technical Assessment ETA-10/0293.
2) The load data take into account the partial safety factors of the resistances given in the European Technical Assessment (ETA) and a partial safety factor of the actions
of γF = 1.4. The values given assume unreinforced or normally reinforced concrete with a spacing of the reinforcing bars s ≥ 15 cm or s ≥ 10 cm at a
rebar diameter ds ≤ 10 mm is assumed.

Design capacities - single anchor - no edge distances - Uncracked concrete

References	Product Reference	Dimensions [mm]	Design capacity - Non-cracked concrete (3)
			Tension - N_Rd (1)				Shear - V_Rd (1-2)				Bending moment MRd [Nm]
			C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	Bending moment MRd [Nm]
7535000806800	FM-753 CRACK A4	M8x68	6.7	-	-	-	10.9	-	-	-	-
7535000807500	FM-753 CRACK A4	M8x75	6.7	-	-	-	10.9	-	-	-	-
7535000809000	FM-753 CRACK A4	M8x90	6.7	-	-	-	10.9	-	-	-	-
7535000811500	FM-753 CRACK A4	M8x115	6.7	-	-	-	10.9	-	-	-	-
7535000813500	FM-753 CRACK A4	M8x135	6.7	-	-	-	10.9	-	-	-	-
7535000816500	FM-753 CRACK A4	M8x165	6.7	-	-	-	10.9	-	-	-	-
7535001009000	FM-753 CRACK A4	M10x90	10.7	-	-	-	18.8	-	-	-	-
7535001010500	FM-753 CRACK A4	M10x105	10.7	-	-	-	18.8	-	-	-	-
7535001011500	FM-753 CRACK A4	M10x115	10.7	-	-	-	18.8	-	-	-	-
7535001013500	FM-753 CRACK A4	M10x135	10.7	-	-	-	18.8	-	-	-	-
7535001015500	FM-753 CRACK A4	M10x155	10.7	-	-	-	18.8	-	-	-	-
7535001018500	FM-753 CRACK A4	M10x185	10.7	-	-	-	18.8	-	-	-	-
7535001211000	FM-753 CRACK A4	M12x110	14.7	-	-	-	24.2	-	-	-	-
7535001212000	FM-753 CRACK A4	M12x120	14.7	-	-	-	24.2	-	-	-	-
7535001214500	FM-753 CRACK A4	M12x145	14.7	-	-	-	24.2	-	-	-	-
7535001217000	FM-753 CRACK A4	M12x170	14.7	-	-	-	24.2	-	-	-	-
7535001220000	FM-753 CRACK A4	M12x200	14.7	-	-	-	24.2	-	-	-	-
7535001613000	FM-753 CRACK A4	M16x130	26.1	-	-	-	48	-	-	-	-
7535001615000	FM-753 CRACK A4	M16x150	26.1	-	-	-	48	-	-	-	-
7535001618500	FM-753 CRACK A4	M16x185	26.1	-	-	-	48	-	-	-	-
7535001622000	FM-753 CRACK A4	M16x220	26.1	-	-	-	48	-	-	-	-

1. The design loads loads have been calculated using the partial safety factors for resistances stated in ETA-approval(s). The loading figures are valid for unreinforced concrete and reinforced concrete with a rebar spacing s ≥ 15 cm (any diameter) or with a rebar spacing s ≥ 10 cm, if the rebar diameter is 10mm or smaller.
2. The figures for shear are based on a single anchor without influence of concrete edges. For anchorages close to edges (c ≤ max [10 hef; 60d]) the concrete edge failure shall be checked per ETAG 001, Annex C, design method A.
3. Concrete is considered non-cracked when the tensile stress within the concrete is\sigmaL +\sigmaR ≤ 0. In the absence of detailed verification\sigmaR = 3 N/mm² can be assumed (\sigmaL equals the tensile stress within the concrete induced by external loads, anchors loads included).

Recommended loads - Cracked concrete - single anchor - no edge distances

References	Product Reference	Dimensions [mm]	Recommended loads - Cracked concrete
			Tension - N_rec				Shear - V_rec				Bending moment M_rec [Nm]
			C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	Bending moment M_rec [Nm]
7535000806800	FM-753 CRACK A4	M8x68	3.1	3.8	4.4	4.8	5.4	5.4	5.4	5.4	10.5
7535000807500	FM-753 CRACK A4	M8x75	3.1	3.8	4.4	4.8	5.4	5.4	5.4	5.4	10.5
7535000809000	FM-753 CRACK A4	M8x90	3.1	3.8	4.4	4.8	5.4	5.4	5.4	5.4	10.5
7535000811500	FM-753 CRACK A4	M8x115	3.1	3.8	4.4	4.8	5.4	5.4	5.4	5.4	10.5
7535000813500	FM-753 CRACK A4	M8x135	3.1	3.8	4.4	4.8	5.4	5.4	5.4	5.4	10.5
7535000816500	FM-753 CRACK A4	M8x165	3.1	3.8	4.4	4.8	5.4	5.4	5.4	5.4	10.5
7535001009000	FM-753 CRACK A4	M10x90	4.8	5.9	6.8	7.4	13.4	13.4	13.4	13.4	21.5
7535001010500	FM-753 CRACK A4	M10x105	4.8	5.9	6.8	7.4	13.4	13.4	13.4	13.4	21.5
7535001011500	FM-753 CRACK A4	M10x115	4.8	5.9	6.8	7.4	13.4	13.4	13.4	13.4	21.5
7535001013500	FM-753 CRACK A4	M10x135	4.8	5.9	6.8	7.4	13.4	13.4	13.4	13.4	21.5
7535001015500	FM-753 CRACK A4	M10x155	4.8	5.9	6.8	7.4	13.4	13.4	13.4	13.4	21.5
7535001018500	FM-753 CRACK A4	M10x185	4.8	5.9	6.8	7.4	13.4	13.4	13.4	13.4	21.5
7535001211000	FM-753 CRACK A4	M12x110	6.2	7.6	8.7	9.6	17.3	17.3	17.3	17.3	37.4
7535001212000	FM-753 CRACK A4	M12x120	6.2	7.6	8.7	9.6	17.3	17.3	17.3	17.3	37.4
7535001214500	FM-753 CRACK A4	M12x145	6.2	7.6	8.7	9.6	17.3	17.3	17.3	17.3	37.4
7535001217000	FM-753 CRACK A4	M12x170	6.2	7.6	8.7	9.6	17.3	17.3	17.3	17.3	37.4
7535001220000	FM-753 CRACK A4	M12x200	6.2	7.6	8.7	9.6	17.3	17.3	17.3	17.3	37.4
7535001613000	FM-753 CRACK A4	M16x130	12.4	15.1	17.5	19.2	26.2	26.2	26.2	26.2	94.9
7535001615000	FM-753 CRACK A4	M16x150	12.4	15.1	17.5	19.2	26.2	26.2	26.2	26.2	94.9
7535001618500	FM-753 CRACK A4	M16x185	12.4	15.1	17.5	19.2	26.2	26.2	26.2	26.2	94.9
7535001622000	FM-753 CRACK A4	M16x220	12.4	15.1	17.5	19.2	26.2	26.2	26.2	26.2	94.9

Installation

Installation data

References	Product Reference	Dimensions [mm]	Ø drilling hole [d0] [mm]	Min. drill depth [h1] [mm]	Ø drilling fixture [df] [mm]	Wrench size [SW] [mm]	Installation torque [Tinst] [Nm]	Embedment depth [hef] [mm]	Min. support thickness [hmin] [mm]
7535000806800	FM-753 CRACK A4	M8x68	8	70	9	13	20	48	100
7535000807500	FM-753 CRACK A4	M8x75	8	70	9	13	20	48	100
7535000809000	FM-753 CRACK A4	M8x90	8	70	9	13	20	48	100
7535000811500	FM-753 CRACK A4	M8x115	8	70	9	13	20	48	100
7535000813500	FM-753 CRACK A4	M8x135	8	70	9	13	20	48	100
7535000816500	FM-753 CRACK A4	M8x165	8	70	9	13	20	48	100
7535001009000	FM-753 CRACK A4	M10x90	10	80	12	17	40	60	120
7535001010500	FM-753 CRACK A4	M10x105	10	80	12	17	40	60	120
7535001011500	FM-753 CRACK A4	M10x115	10	80	12	17	40	60	120
7535001013500	FM-753 CRACK A4	M10x135	10	80	12	17	40	60	120
7535001015500	FM-753 CRACK A4	M10x155	10	80	12	17	40	60	120
7535001018500	FM-753 CRACK A4	M10x185	10	80	12	17	40	60	120
7535001211000	FM-753 CRACK A4	M12x110	12	100	14	19	60	72	150
7535001212000	FM-753 CRACK A4	M12x120	12	100	14	19	60	72	150
7535001214500	FM-753 CRACK A4	M12x145	12	100	14	19	60	72	150
7535001217000	FM-753 CRACK A4	M12x170	12	100	14	19	60	72	150
7535001220000	FM-753 CRACK A4	M12x200	12	100	14	19	60	72	150
7535001613000	FM-753 CRACK A4	M16x130	16	115	18	24	120	86	170
7535001615000	FM-753 CRACK A4	M16x150	16	115	18	24	120	86	170
7535001618500	FM-753 CRACK A4	M16x185	16	115	18	24	120	86	170
7535001622000	FM-753 CRACK A4	M16x220	16	115	18	24	120	86	170

Spacings and edge distances

References	Product Reference	Dimensions [mm]	Min. edge distance [cmin] [mm]	Min. spacing [smin] [mm]	Characteristic edge distance [ccr,N] [mm]	Characteristic spacing(5) - Scr,N [scr,N] [mm]
7535000806800	FM-753 CRACK A4	M8x68	50	50	72	144
7535000807500	FM-753 CRACK A4	M8x75	50	50	72	144
7535000809000	FM-753 CRACK A4	M8x90	50	50	72	144
7535000811500	FM-753 CRACK A4	M8x115	50	50	72	144
7535000813500	FM-753 CRACK A4	M8x135	50	50	72	144
7535000816500	FM-753 CRACK A4	M8x165	50	50	72	144
7535001009000	FM-753 CRACK A4	M10x90	50	55	90	180
7535001010500	FM-753 CRACK A4	M10x105	50	55	90	180
7535001011500	FM-753 CRACK A4	M10x115	50	55	90	180
7535001013500	FM-753 CRACK A4	M10x135	50	55	90	180
7535001015500	FM-753 CRACK A4	M10x155	50	55	90	180
7535001018500	FM-753 CRACK A4	M10x185	50	55	90	180
7535001211000	FM-753 CRACK A4	M12x110	60	60	108	216
7535001212000	FM-753 CRACK A4	M12x120	60	60	108	216
7535001214500	FM-753 CRACK A4	M12x145	60	60	108	216
7535001217000	FM-753 CRACK A4	M12x170	60	60	108	216
7535001220000	FM-753 CRACK A4	M12x200	60	60	108	216
7535001613000	FM-753 CRACK A4	M16x130	70	70	129	258
7535001615000	FM-753 CRACK A4	M16x150	70	70	129	258
7535001618500	FM-753 CRACK A4	M16x185	70	70	129	258
7535001622000	FM-753 CRACK A4	M16x220	70	70	129	258

Select one of our Websites

Connectors

Anchor System

Nails and Screws

Product Details

Images

Features

Material

Benefits

Application

Applications

Suitable for

Technical Data

Dimensions

Autres

Product dimensions

Recommended loads / Non-cracked concrete / for single anchors / with no edge distances or spacings

Design capacities - single anchor - no edge distances - Uncracked concrete

Recommended loads - Cracked concrete - single anchor - no edge distances

Installation

Installation

Installation data

Spacings and edge distances

Certification

Declaration of Performance (DoP)

European Technical Assessment (ETA)

About Simpson Strong-Tie®

Simpson Strong-Tie Poland

Phone

Email

Website

Copyright (en-LV)